manualshive.com logo in svg

ERT SpiroSphere, Instructions For Use Manual, Page: 104 / 136

Share
Download
ERT SpiroSphere Instructions For Use Manual Download Page 104

SpiroSphere

®

 ECG Instructions for Use

Page 104/136

 

Version 02.02 • 04AUG2022

Malfunction

Cause of the Malfunction

Removal of the Malfunction

The ECG unit cannot be 
switched on.

Battery discharged below 
minimum power requirements.

Change battery for either a new or 
(re)charged one.
Check polarity of the inserted 
energy source.

The ECG unit is not 
visible to the receiving 
Bluetooth devices.

There is already a Bluetooth 
pairing with another device.

Put the device into pairing mode. 
For this, press the button after 
power-on until the blue LED 

ashes. This indicates that the 

former pairing is removed and the 
device is visible in the Bluetooth 
vicinity.

No or fragmentary ECG 
data is transferred.

Radio communication is 
interrupted.

Reduce distance to receiving unit 
or remove a possibly existing 
obstacle.

Device detects no ECG 
signal.

Check ECG cable application and 
restart the device.
Remove and insert battery before 
restart if normal restart leads to 
the same malfunction.

Summary of Contents for SpiroSphere









































































































































Reviews:

No comments