manualshive.com logo in svg

ERT SpiroSphere, Instructions For Use Manual, Page: 25 / 136

Share
Download
ERT SpiroSphere Instructions For Use Manual Download Page 25

SpiroSphere

®

 ECG Instructions for Use

Page 25/136

Version 02.02 • 04AUG2022

Tap on the "

Search Patient

" button on the Home Screen to open the list of all 

patient data saved in the database. 

data of a new Patient can be entered

Display 

all

 tested patients

Display all Patients tested 

today

 

Display all Patients tested 

yesterday

Display all Patients tested 

this week

Display all Patients tested 

this month

 

Search for speci c Patients by entering his/her last name or ID.  Entering the 

rst letter or the  rst character of the patient's ID is suf cient as well: If e.g. "S" 

is entered, all patients whose last names start with "S" are displayed. 

Search Patient

The following screen appears:

List of all patients

When a patient whose data is already stored in the database comes for another visit, 
you can reload his/her data from the patient directory. You do not have to enter the data 
again.

Summary of Contents for SpiroSphere









































































































































Reviews:

No comments