14
SET-UP ASSEMBLY
Set-Up from Shipping
1. Remove the straps holding the attachment to the
pallet.
2. Remove the six bolts and nuts attached to the
torsion frame.
3. Position the torsion frame so that the holes are
aligned with the holes in the sides of the pivot
frame.
NOTE:
Blocks may be needed to raise up the
pivot frame. Use a hoist when lifting the pivot
frame.
4. Install the six bolts connecting the torsion frame
to the pivot frame.
5. Tighten the six bolts and nuts to the proper
torque. Refer to “Bolt Torque Information” on
page 25 of this manual.
