14
ROUTINE MAINTENANCE___________________
Cleaning the
Brush Mower
To avoid injury or death,
before exiting under or servicing under the
attachment, be sure to disconnect the
auxiliary hydraulic hoses. Raise the lift
arms and tilt the attachment down fully.
Install an approved lift arm support and stop
the engine.
1. Position the attachment by raising the lift arms
and tilting the attachment down, as shown. Use
an arm lock when working with arms raised.
This may require the help of an assistant. Refer
to loader’s operator’s manual for arm locking
instructions. Keep the front edge of the
attachment
within one foot of the ground for
debris clean out or blade service.
2. Exit the loader.
Always wear eye protection
that meets z87.1 when cleaning.
3. Remove the gearbox cover.
4. Use water or a small brush to clean debris from
the areas under the cover and around the
gearbox.
Use care when removing any
debris that is wrapped around the blades,
stump jumper, or gearbox shaft. Blades can
rotate suddenly
.
5. Reinstall cover when clean.
