7
USERS MOUNTING INSTRUCTIONS
After the initial set-up assembly is completed use the following procedure to mount the attachment to the loader
for user operation.
1. Use the step, treads, and grab handles to get
on and off the loader and attachment.
2.
Sitting in the operator’s seat, lower seat bar and
fasten the seat belt.
3. Drive the loader to the rear of the brush mower.
Put the loader quick attach coupler into the
attachment mounting bracket.
4. Tilt the loader coupler backward a small amount
until it is fully engaged in the attachment
mounting bracket.
5. Stop the engine and engage the parking brake.
6. Secure the coupler locking mechanism that
attaches the attachment to the loader.
Coupler wedges or pins must
extend through the holes in attachment. Levers
must be fully down and locked. Failure to
secure wedges or pins can allow attachment to
come off and cause injury or death.
