7
USER
’S MOUNTING INSTRUCTIONS
After the initial set-up assembly is completed, use the following procedure to mount the attachment to the
loader for user operation.
Coupler wedges or pins must extend through the holes in the attachment mounting
plate. Levers must be fully down and locked. Failure to secure wedges or pins can allow
attachment to come off and cause injury or death.
1. Use the step, safety treads, and grab
handles to get on and off the loader and
attachment.
2.
Sitting in the operator’s seat, lower seat
bar and fasten the seat belt.
3. Drive the loader to the rear of the
attachment. Put the loader quick attach
coupler into the attachment mounting
bracket.
4. Tilt the loader coupler backward a small
amount until it is fully engaged in the
attachment mounting bracket.
5. Stop the engine and engage the park
brake.
6. Secure the coupler locking mechanism
that attaches the attachment to the loader.
