DESCRIPTION OF THE PRODUCT
Descripcion_V.0
2.fm - 25/6/09
LINCE actuator for sliding gates
47
6
MANUAL OPERATION
In the event of need, the gate may be operated manually:
Unlocking for manual operation Motorised
operation locking
7
DECLARATION OF CONFORMITY
Erreka Automatismos declares that the LINCE actuator
has been designed for use in a machine or for assembly
along with other elements in order to form a machine
in line with Directive 89/392 EEC and successive
modifications.
The LINCE actuator allows us to carry out installations in
line with the standards EN 13241-1 and EN 12453.
The LINCE actuator complies with safety legislation in
line with the following directives and standards:
•
73/23 EEC and successive modification 93/68 EEC
•
89/366 EEC and successive modifications 92/31 EEC
and 93/68 EEC
•
UNE-EN 60335-1
3
1
Turn the cover (1) 180º to reveal the cylinder.
2
Introduce the key (2) and turn 90º clockwise.
The cylinder will protrude a few millimetres.
3
Turn the key 90º anti-clockwise and remove.
4
Turn the handle (3) clockwise 270º until it
reaches the stopper.
The gate can now be operated manually.
The display will show
STOP
.
3
1
Turn the handle (3) anti-clockwise 270º until it
reaches the stopper.
2
Push the cylinder (4) inwards and turn the cover
(1) to cover it.
3
Move the gate manually until interlocked in the
actuator.
4
Activate an operation device: the gate will carry
out a reset (the display shows
rS
) and remains
ready for motorised operation.
LINCE idiomas.book Page 47 Thursday, June 25, 2009 12:50 PM
