Erreka Dolfin DOS424E, Installer Manual

Page: 56 / 114

Desemba
laje_153.fm -
5/9/11
52
Installation Manual
UNPACKING AND CONTENT
1
UNPACKING
1
Open the package and remove the contents from
within.
}
Discard the packaging in an environmentally
friendly manner, using recycling containers.
 Do not leave the packaging within the reach
of children or handicapped people, as it may
cause injury.
2
Check the content of the package (see figure
below).

Should it be noticed that a piece is missing or
deteriorated, contact the nearest technical service.
2
CONTENT
Fig.2 Content
I153A
1
Operator with built-in control panel
2
Drive belt (supplied installed in the operator)
The total length of the belt is 6.5 m. It is supplied installed in the operator, with 3m
on each side.
3
Screws with washers (four)
4
Unlocking keys (two)
5
Instructions Manual

To secure the belt in the gate, install a guide profile which is supplied separately. Two
models are available: ADO02 (for gates of up to 4 metres) and ADO03 (for gates of
up to 6 metres).