11
AXIL
Quick installation and programming guide
English
IMPORTANT
NOTE
This quick guide is a summary of the complete installation manual. The manual contains safety warnings and
other explanations which must be taken into account. The installation manual can be downloaded by going
to the "Downloads" section of Erreka website:
http://www.erreka.com/Automatismos/descargaDocumentos.aspx
E198A
TC
Elements of the complete installation
Electrical wiring
A
: Main power supply
B
: Flashing light
C:
Photocells (Tx / Rx)
D
: Pushbutton or key switch
E
: Operator
F
: Antenna
We recommend using an electrolock for
leaf lengths of over 2.5m.
IMPORTANT:
if the optional AAX01
stopper is installed, we recommend
installing the
TC
exterior closing stopper.
If the AAX01 stopper is not installed,
TC
is
obligatory.
D198B
3
2
4
2
1
D198A
1
2
2
3
4
Manual operation
Unlocking (manual operation)
1
Remove the cover (1) and insert the key (2).
2
Turn the key (2) clockwise and open the cover (3)
completely.
3
Turn the handle (4) clockwise until it reaches the
stopper.
Locking (motorised operation)
1
Turn the handle (4) anti-clockwise until it reaches the
stopper and remove.
2
Close the cover (3) and turn the key (2) anti-clockwise.
3
Remove the key (2) and position the cover (1).
MSB
-022/00
