EROAD ehubo2 Installation Manual Download Page 3

4

Please read carefully before beginning installation!

LEGAL NOTICE AND DISCLAIMER

The legislation and rules concerning the installation and operation of GPS driver aids and messaging 
devices such as the Ehubo2 vary from each country and state. Please familiarize yourself with the laws 
of the jurisdiction(s) in which the vehicle will be operated in prior to installing and using the Ehubo2.

Driving laws place the responsibility on the driver to correctly install and use GPS driver aids. It is 
therefore the Customer’s responsibility to install and use the Ehubo2 in a manner that complies with 
the law and will not cause accidents, personal injury or property damage. The owner of this Ehubo2 is 
responsible for observing safe driving practices.

EROAD DISCLAIMS ALL LIABILITY FOR ANY USE OF THIS EHUBO2 IN A WAY THAT MAY CAUSE 
ACCIDENTS, DAMAGE OR VIOLATE THE LAW.

TO THE MAXIMUM EXTENT PERMITTED BY LAW, ALL REPRESENTATIONS AND WARRANTIES 
(EXCEPT ANY WHICH MAY NOT LAWFULLY BE EXCLUDED) ARE EXPRESSLY EXCLUDED, INCLUDING 
WITHOUT PREJUDICE TO THE GENERALITY OF THE FOREGOING, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

As EROAD is continuously improving its products, EROAD may make changes to the Ehubo2 at any 
time which may not be reflected in this document. Please contact your nearest EROAD office if you 
require any further assistance. 

PERSONAL PROTECTIVE EQUIPMENT (PPE)

Federal, national or local health and safety regulations may require wearing appropriate Personal 
Protective Equipment (PPE). PPE may include items such as safety glasses, safety shoes, work gloves, 
hard hat, high visibility vest, and work uniform. Make sure to comply with appropriate standards and 
check with customers or third parties to verify whether they have additional PPE requirements. 

INSTALLATION

• Installers and contractors must follow all health and safety regulatory requirements to ensure a safe 

and healthy work environment. 

• Whenever the equipment is parked, the parking brake shall be set. Equipment parked on inclines 

shall have the wheels chocked and the parking brake set.

• Equipment, or parts thereof, which are suspended or held aloft by use of slings, hoists, or jacks shall 

be substantially blocked or cribbed to prevent falling or shifting before employees are permitted to 
work under or between them.

•  Installing and servicing electronic devices can be hazardous due to electrical components.  

Make sure to create a safe working environment to avoid hazards and to ensure correct and safe 
installation and operation.

• EROAD recommends the use of a qualified professional automotive technician to install the Ehubo2. 

Make this Installation Guide available to the appropriate personnel. Store it for future reference.

• To avoid damage do not run cables close to heat sources, sharp edges or other obstacles 

that might damage them.

• Do not run cables directly next to safety-relevant devices. 
• Do not damage existing wiring and components when drilling the dashboard.
• Avoid fitting the Ehubo2 in a location that could cause injury to a driver or passenger in a crash. 

This includes potential head strike zones on the windshield or dashboard, or other locations where 
a deploying airbag may contact the Ehubo2. 

• Do not block or impair the deployment of airbags and other safety-relevant devices.

Important Safety Information

Summary of Contents for ehubo2
















Reviews: