ero electronic MKP, User Manual

Page: 42 / 172

38
CnF. 2CnF. 2CnF. 2CnF. 2CnF. 2
- Valve position indication - [C.E06] - Valve position indication - [C.E06]
- Valve position indication - [C.E06] - Valve position indication - [C.E06]
- Valve position indication - [C.E06]
This parameter will be displayed only when open loop
servomotor control drive output is configured.
Range: Fb
= The valve position is measured and displayed
no.Fb = The valve position is not measured
NOTE NOTE
NOTE NOTE NOTE: If the feedback option is not mounted, this parameter
will be forced to “no.Fb” (no feedback).
- OUT 5 function - [C.E07] - OUT 5 function - [C.E07] - OUT 5 function - [C.E07] - OUT 5 function - [C.E07] - OUT 5 function - [C.E07]
Range: nonE = Output not used
ñAin = Main control output (linear)
SECn = Secondary control output (linear)
PV.rt = Process variable retransmission
SP.rt = Operative set point retransmission
NOTE NOTE NOTE NOTE NOTE: When the option circuitry is not mounted the middle
display will show “no.Pr” (not present).
- OUT 5 range - [C.E08] - OUT 5 range - [C.E08]
- OUT 5 range - [C.E08] - OUT 5 range - [C.E08]
- OUT 5 range - [C.E08]
This parameter will be available only when Out 5 is configured
("O5.Fn" [C.E07] different from "nonE")
Range: 0-20 = 0
÷ 20 mA
4-20 = 4
÷
20 mA
- OUT 5 retransmission initial scale value - OUT 5 retransmission initial scale value
- OUT 5 retransmission initial scale value - OUT 5 retransmission initial scale value
- OUT 5 retransmission initial scale value
- [C.E09] - [C.E09] - [C.E09] - [C.E09] - [C.E09]
This parameter will be available only when Out 5 function
[C.E07] is configured as “PV.rt” or “SP.rt”
Range: From -1999 to 9999
NOTES
NOTES NOTES NOTES NOTES:
1) Decimal point is positioned as previously selected at “CnF.1
- ñ.In.d” [C.d03])
2) The OUT 5 retransmission initial scale value can be higher
than OUT 5 retransmission full scale value [C.E.10].
XKP-1-D1.pmd 25/05/2006, 11.28 38