Installation Guide
14
3.3
Cable Definition and Requirements
For operation, the integrated Dome Camera requires the video
the video signals to the remote viewing site, power cable to p
cable to carry
ower the Dome
Camera and RS-485 data cable to carry commands from the control device.
3.3.1
uire video and
•
RS-485 cable carries commands from a control device to the Dome
•
e Camera.
Ensure power supply corresponds with the Dome Camera’s
nt, or product impairment will occur. If any mistake
ngineer.
The analog and IP Dome Camera’s Data Cables are illustrated respectively
as shown below.
Analog
Dome
Camera
The analog Dome Camera’s data cable is illustrated as follows.
Power
Input
Cable Requirements
For operation, the Integrated High Speed Dome Cameras req
Data Cables as described below:
•
The video cable sends video signals to a remote viewing site. Using a
coaxial cable to send video signals is recommended.
Cameras. A CAT 5, 24 gauge cable is recommended.
The power cable provides AC 24V power supply to the Dom
NOTE:
power requireme
happens, please contact with a qualified maintenance e
3.3.2
22-Pin Data Cable
3-Pin Terminal Block
Video
Output
BNC connector
RS485
Connector
4-wire
