Set the pre-position sequence dwell time
To set the dwell time for the telemetry receiver currently being controlled to 15 seconds, press:
1
ð
ð
5
ð
ð
Set dwell time to 15 sec.
The dwell time range is 0 to 255 sec.
Set Home position
To use preposition 8 as Home-position with a time-out of 60 seconds, press:
8
ð
ð
ð
ð
6
ð
ð
Use pre-position 8 as Home position with a 60 sec. time-out
Note, that the time-out entry automatically is multiplied with 10.
Max. time-out entry is 255 corresponding to 2550 seconds.
Set Auto panning limits (available on the ICU, SATURN & BDR-575 only)
To set the two limit positions for auto panning, for the camera being controlled:
1
ð
ð
SHIFT
+
AUTO
and
2
ð
ð
SHIFT
+
AUTO
Set auto panning limit 1 (left)
Set auto panning limit 2 (right)
1504M E-Mux & PTZ control
2821-00062
Page 11
On the E-Mux, press:
and select the following menus:
Serial Ports
RS-232 Port
Baud: 9600
Parity: None
Mode: 1 Stop
Code: 8-Bit ASCII
Flow Control: None
