# VSH400PLC090909
- 18 -
Equip the station with a blanking die and enter the settings as described in
item 6.2
Move the rail in the space between the die block and the punch and move the
rail to the bumper S2
Press the pedal Q3 to start the die blanking procedure; after the operation is
complete, the piston rod will return to its starting position.
To repeat the operation, release the pedal and press it again.
8.1.2 OVAL AND SQUARE HOLES
Prepare the station as described in 6.1
Equip the station with a blanking die and enter the settings as described in
item 6.2
Insert the setting mandrel [16].
Install the appropriate punch and blanking die.
Move the rail into the space between the die block and the punch and move
the rail to the bumper S2
Press the pedal Q3 to start the die blanking procedure; after the operation is
complete, the piston rod will return to its starting position.
To repeat the operation, release the pedal and press it again.
Accessories as per order
Punches, type SH403 – hole for M6-M20 screws (a set of punch and blanking die)
Standard dimensions
Designation
Hole diameter
[mm]
For a screw
M
SH403 6,6
ν
6,6
6
SH403 8,5
ν
8,5
8
SH403 11
ν
11
10
SH403 13
ν
13
12
SH403 17
ν
17
16
SH403 21
ν
21
20
Punches, type SH403 with any diameter are available in the range from
ν
6,6 to
ν
21
mm are available on request.
Oval punches, SH404, with dimensions A and B (see the
table)
Standard dimensions
Designation
Dimension A
[mm]
Dimension B
[mm]
For a screw
M
SH404 8,5-12
8,5
12
8
SH404 11-16
11
16
10
SH404 13-18
13
18
12
SH404 17-21
17
21
16
Other dimensions of oval punches, type SH404, are available on request; the
condition of B/A<2 should be met
