# VSH400PLC090909
- 10 -
6.5 OFFSETTING
In order to start the offsetting operation, go to the BODY menu and equip the body with
offsetting inserts SH 406PLC. After the inserts are installed, the screen as in Fig. 14
should be displayed on the screen.
Fig.14 Fig.15
Fig.16 Fig.17
For the offsetting operation to be performed correctly, it is necessary:
To introduce the rail width.
Press the button situated below the heading “HEIGHT OF THE RAIL H”
(The default value displayed on the button – “0” Fig. 14). The numerical
keyboard will be displayed with which you will enter the width of the rail
being bent. Confirm the value by pressing RET Fig. 15.
To adjust the body height in relation to the rail.
Turn the knob S1 so that the centre of the rail width coincide with the
centre of the bending insert. The arrow in area H in Fig. 16, showing
whether the body should be lifted or lowered, will help. If the value has
been achieved, the OK message will appear in area H, Fig. 17
To adjust the distance between the offsetting and the rail edge.
Move and block the bumper slide S2 to the desired distance. The value
of offsetting is displayed in area L Fig. 17.
