Ericsson MINI-LINK E Technical Description Download Page 31

Page: 31 / 190

MINI-LINK E and E Micro

3.3

RAU1 (7-E and 8-E)

This radio unit contains frame, cover, microwave sub-unit and filter unit.

The vertical frame has a waveguide interface for connection to the antenna.

The bottom of the cover carries the radio cable connector that is the interface

with the indoor modem unit (MMU), and a test port for antenna alignment.

The connector for the radio cable is equipped with gas discharge tubes for

lightning protection.

Replacing the filter unit can change the sub-band for a radio within a group of

sub-bands. For more information, see the MINI-LINK E and E Micro Product

Catalog (AE/LZT 110 2011), chapter Radio Units.

5315

Figure 26

RAU1 for 7 and 8 GHz

AE/LZT 110 2012 R8C 2002-03-04

Summary of Contents for MINI-LINK E































































































































































































Search results

Summary of Contents for MINI-LINK E

Reviews:

Related manuals for MINI-LINK E

Brands by name

Popular brands

Ericsson MINI-LINK E, Technical Description

Search results

Summary of Contents for MINI-LINK E

Reviews:

Related manuals for MINI-LINK E

Brands by name

Popular brands