Ericsson MINI-LINK E Technical Description Download Page 96

Page: 96 / 190

MINI-LINK E and E Micro

5.2

Antenna Installation

This section describes the mounting kits for the 0.2 m, 0.3 m and 0.6 m

compact antennas.

An antenna mounting kit consists of two rigid, extruded aluminum brackets

connected with two stainless steel screws along the azimuth axis. The brackets

are anodized and have threaded and unthreaded holes to provide adjustment of

the antenna in azimuth and elevation.

The support can be clamped to poles with a diameter of 50 – 120 mm or on

L-profiles 40 x 40 x 5 – 80 x 80 x 8 mm with two anodized aluminum clamps.

All screws and nuts for connection and adjustment are in stainless steel.

NordLock washers are used to secure the screws.

3562

Figure 64

Mounting kit for the 0.2 m compact antenna

The 0.2 m compact antenna mounting kit can be adjusted by ±13 in elevation

and by ±90 in azimuth.

3561

Figure 65

Mounting kit for 0.3 m and 0.6 m compact antennas

AE/LZT 110 2012 R8C 2002-03-04

Summary of Contents for MINI-LINK E































































































































































































Search results

Summary of Contents for MINI-LINK E

Reviews:

Related manuals for MINI-LINK E

Brands by name

Popular brands

Ericsson MINI-LINK E, Technical Description

Search results

Summary of Contents for MINI-LINK E

Reviews:

Related manuals for MINI-LINK E

Brands by name

Popular brands