Ericsson MINI-LINK E Technical Description Download Page 83

Page: 83 / 190

MINI-LINK E and E Micro

3.13

Upgrading

3.13.1

Change of transmission capacity

The capacity agile MMU 2x2 – 34+2 allows capacity upgrade without hardware

replacement. This is done by using MINI-LINK Service Manager (MSM).

When using an MMU with fixed traffic capacity, the upgrade is achieved by

exchanging it for an MMU with a higher traffic capacity.

When 8x2 or 17x2 Mbit/s is required an SMU has to be added. In some cases

the AMM 1U has to be changed to an AMM 2U-3. This applies to both the

capacity agile MMU and MMUs with fixed traffic capacity. See the MINI-LINK E

and E Micro Product Catalog (AE/LZT 110 2011) for more information.

AE/LZT 110 2012 R8C 2002-03-04

Summary of Contents for MINI-LINK E































































































































































































Search results

Summary of Contents for MINI-LINK E

Reviews:

Related manuals for MINI-LINK E

Brands by name

Popular brands

Ericsson MINI-LINK E, Technical Description

Search results

Summary of Contents for MINI-LINK E

Reviews:

Related manuals for MINI-LINK E

Brands by name

Popular brands