Basic Configuration
EN/LZT 108 6492 R1
23 (98)
April 2003
Figure 11: RFC1483/Ethernet over ATM(EoA) Config
3
Enable Bridging function:
a
Select Bridging > Bridging page to display the Bridge Configuration page.
b
Select eth-0 from the list and click
Add
.
c
Select the EOA interface to be used (e.g. eoa-0 ) from the drop-down list, and
then click
Add
.
d
Set the Bridging item to Enable and click
Submit
. A confirmation page
appears to confirm your changes.
4
LAN configuration:
a
Select Bridging > LAN Config.
b
Don't modify the settings; just keep the default as shown in the figure below:
