Hardware Description and Connection
10 (98)
EN/LZT 108 6492 R1
April 2003
2.4
Connecting the Hardware
Follow the procedures below to connect related devices. Before you begin, turn the
power off for all devices. These include your computer(s), your LAN hub/switch (if
applicable), and the HM210dp/di.
1
Connect to the ADSL Line.
Connect one end of the provided ADSL Line cable to the port labeled DSL on
the back panel of the HM210dp/di. Connect the other end to your ADSL service
port (splitter/filter or phone outlet).
Note:
Depending on the service type offered by your ISP, an
additional splitter may be needed. If this is the case,
consult with your ISP for actual connection.
2
Connect to a PC or hub/switch.
•
To a single PC - Attach one end of the provided Ethernet cable
(straight-through) to the port labeled LAN on the HM210dp/di. Connect the
other end to your PC’s Ethernet port.
•
To a hub/switch - Attach one end of a “cross-over” Ethernet cable to a
hub/switch and the other end to the LAN port on the HM210dp/di.
•
To a hub/switch’s uplink port: - Use a “straight-through” cable to connect it
to the uplink port and the other end to the LAN port on the HM210dp/di.
3
Attach the power connector.
Connect the provided Power cable to the PWR socket on the HM210dp/di. Plug
the power supply adapter into a power source (wall outlet or power strip).
4
Turn on the HM210dp/di and power up your systems.
Press the
Power
button on the back panel of the HM210dp/di to turn on the
device.
Turn on and boot up your computer(s) and any LAN devices such as hubs or
switches.
