Basic Configuration
20 (98)
EN/LZT 108 6492 R1
April 2003
5
Basic Configuration
This chapter provides basic configuration instructions to get your HM210dp/di run
and have your network connected to the Internet.
The instructions assume that the HM210dp/di is not predefined with any ATM VC,
PPP and IPoA settings. For each connection method, example parameters are given
for your better understanding. You should consult with your ISP to determine your
connection mode and enter the actual values provided by your ISP.
Note:
Your HM210dp/di may already be preconfigured with
the necessary settings to get your network connected
to the Internet. Contact your ISP to determine whether
you should change any existing values.
5.1
Bridge Mode
5.1.1
Configuring the HM210dp/di
1
Creating an ATM VC interface:
a
Select Bridging > ATM VC > Add. The ATM VC - Add page appears:
Figure 8: ATM VC - Add
b
Enter the provided fields as below:
