LBI-38962
9
Sample SYSTEM.TXT File
The following is a SYSTEM.TXT configuration file that would match the example configuration: IP hosts with
all network layer RDTs. Note here that since only network layer RDTs are being used, no entries are required in
the [ip_map_id_table] for the IP hosts. The EDG Configuration Reference Manual contains a detailed
explanation of each command.
###############################################
# SYSTEM.TXT configuration file.
###############################################
[board 1]
type cap
load 01.02/loads/CAP.SX
[board 2]
type tsi_master
load 01.02/loads/TSI.SX
port_dir 0 bi
port_dir 1 bi
port_dir 2 bi
port_dir 3 bi
tsi_edacs_id 16382
[ip]
cap_ext_address
1.0.15.14
[imc 1]
ip_network_id 128.1.0.0
[ip_map_id_table]
u 64 - 16381
128.1.0.64
# All possible Radios.
# 16382 is used for the TSI Master.
g 0 - 2047
128.1.64.0
# All possible groups.
[network_layer_rdt_table]
u 64 - 16381
g 0 - 2047