LBI-38962
14
Sample SYSTEM.TXT File
The following is a SYSTEM.TXT configuration file that would match the example configuration. The EDG
Configuration Reference Manual contains a detailed explanation of each command. During the initial load
analysis, it was found that host A would be lightly loaded, with a single serial link sufficient to handle all data
traffic. Conversely, it was found that host B would be heavily loaded, requiring three separate serial links.
###############################################
# SYSTEM.TXT configuration file.
###############################################
[board 1]
type cap
load 01.02/loads/CAP.SX
[board 2]
type tsi_master
load 01.02/loads/TSI.SX
port_dir 0 bi
port_dir 1 bi
port_dir 2 bi
port_dir 3 bi
tsi_edacs_id 16382
[board 3]
type hdi
load 01.02/loads/HDI.SX
port_dir 0 bi
# Host A
port_dir 1 bi
# Host B
port_dir 2 bi
# Host B
port_dir 3 bi
# Host B
hdi_port_hosts 0 61 # Host A
hdi_port_hosts 1 62 # Host B
hdi_port_hosts 2 62 # Host B
hdi_port_hosts 3 62 # Host B
[IP]
cap_ext_address
1.0.0.1
# This command must always be specified,
# whether connected to an external IP network
# or not.