Command Line Interface
1553-CNH 160 0787 Uen PA2 2005-09-23
89
•
Example
relay-agent-string
<string> \r 1
-:
String
of characters to be used when the method is
Remote ID – String
or
Circuit ID - String
.
Default Settings
cpe-access-method: DHCP
relay-agent-configuration: Not used
Command Usage
The command is used to set the End-user’s access method to the network
for the service and to configure the relay agent. The relay agent configura-
tion can only be selected for a DHCP or PPP access method. The IP
DSLAM will insert an identifier in all DHCP requests or PoE Active Discov-
ery Requests (PADR) from the End-user, and thereby allow the Service
Operator (Access Provider) to authenticate and control the rights to assign
IP addresses to End-users. String is one of the identifier methods where
specific characters are inserted. A string of up to 253 octets (characters)
can be inserted. For further information refer to
PEM Overview
.
Note:
The access method used, will depend on the equipment used by
the Service Provider and the CPE equipment.
Example
ecn330
(config)#
dslport 1.0.1 pvc 1 general cpe-access-
method dhcp relay-agent-configuration Remote ID -
String relay-agent-string user1-of-netservice
11.6.2.6.2 pvc
atm
Used to configure ATM Service Classes, VPI and VCI and enabling up-
stream policing for the PVC.
Command level:
ecn330(config)#.
Syntax
dslport
<dslport>
pvc
<pvc>
atm [atm-service-class
<class>
] [upstream-policing {enable|disable}] [vci
<vci>
] [vpi
<vpi>
]
Arguments
:
Summary of Contents for ECN320
