Ericsson ECN320, User Manual

Page: 142 / 188

Command Line Interface
134
1553-CNH 160 0787 Uen PA2 2005-09-23
Syntax
cli-autologout <time>
Arguments:
•
cli-autologout < time> –
Set the time in the range 1-30
minutes after which the CLI auto logs out.
Command Usage
By default the CLI will log out after 5 minutes if there is no user input. This
command is used to disable CLI auto-logs out or to set another log out
time.
Default Setting
5
Example
ecn330(config system)# cli-autologout 30
11.6.10.5 install
Use this command to install software for embedded nodes (IP DSLAMs,
ESN310, ESN108, ELN220 switches, ECN switching unit, EXN104 FE-
E1/T1 converter and ECN switch).
Command level:
ecn330(config system)#.
Syntax
install software
Default Setting
None
Command Usage
This command installs new SW for the embedded nodes in the ECN. The
command should be executed after the SW has been uploaded to the ECN
from the LCT (Local Craft Tool). The new SW is recognized by the file
name, and will automatically be uploaded to the embedded node. The em-
bedded node will automatically restart after the command is executed. For