Ericsson Dialog 3413 User Manual Download Page 11

Page: 11 / 76

BusinessPhone – IP Telephone Dialog 3413

Outgoing Calls

Busy extension

You call an extension and receive busy tone.

Camp-on

You can notify a busy extension of your call by a muted ringing call
(if this function is allowed).

Press to camp-on

(Keep handset off hook) When the called extension replaces the
handset it will be called automatically.

Note:

If you receive the busy tone again, the desired

extension does not allow camp-on.

Intrusion

You can intrude on an ongoing call on a busy extension (if this
function is allowed).

Press to intrude

Intrusion tone is heard and a three-party call is established. When
the called extension replaces the handset and you keep off hook,
the called extension will be recalled automatically.

Note:

If you still hear the busy tone, then your extension

does not have the authority to intrude or the desired
extension is protected against intrusion.

Summary of Contents for Dialog 3413













































































Search results

Summary of Contents for Dialog 3413

Reviews:

Related manuals for Dialog 3413

Brands by name

Popular brands

Ericsson Dialog 3413, User Manual

Search results

Summary of Contents for Dialog 3413

Reviews:

Related manuals for Dialog 3413

Brands by name

Popular brands