Ericsson Dialog 3413 User Manual Download Page 27

Page: 27 / 76

BusinessPhone – IP Telephone Dialog 3413

Internal Messages

Check and store received messages

You can check and store your received messages.

Received messages are divided into following three categories:

•

New messages (not heard)

•

Heard messages

•

Stored messages

Voice messages can also be forwarded to other mailbox numbers
(individual or common), see section “

Forward a voice message

” on

page 28.

Note:

Messages are deleted from the system after a certain

time. The time depends on which category the message
belongs to. Please ask your system administrator
regarding this.

Lift the handset

*59#

Dial

You can check and store your received messages. Up to
20 messages can be stored.

Voice messages will be heard via the speaker or the handset.
“Call me” messages will call the sender automatically (these
messages cannot be stored).

Note:

Depending on the configuration, you might be asked

for your password before you can retrieve your messages.
See section

“

Security

” on page 46

Summary of Contents for Dialog 3413













































































Search results

Summary of Contents for Dialog 3413

Reviews:

Related manuals for Dialog 3413

Brands by name

Popular brands

Ericsson Dialog 3413, User Manual

Search results

Summary of Contents for Dialog 3413

Reviews:

Related manuals for Dialog 3413

Brands by name

Popular brands