Preparing for remote maintenance
33
Chapter 7 Preparing for remote
maintenance
Modem connection
Your supplier can perform remote maintenance on the cordless system by a
modem connection.
The modem can be connected to the radio exchange with the Modem shell
adapter (RNTNB 102 109) and the PC (RS232) cable. The Modem shell
adapter connects with a 9 pins connector to the RS232 cable. At the other side
it has a 25 pins connector, to which a modem can be connected (see figure 6).
Fig. 6 Remote maintenance configuration
With CSM you can initialise the modem on the side of the cordless system for
remote maintenance of the cordless system.
Note
In case of troubles with the modem, see the accompanying documentation.
Initialising the system side modem with CSM
1.
Determine the baud rate of the cordless system.
If necessary you can check the baud rate as follows:
a.
Connect the PC with CSM to the cordless system.
b.
Check the baud rate setting of the cordless system with the
‘Connection Settings’
option in the
‘System’
menu.
c.
Disconnect the CSM software from the cordless system.
Remote PC
Cordless system
DCT1800-S
Modem shell adapter
(RNTNB 102 109)
PC modem
cable
CSM side
modem
System side
modem
PC cable
(TSRNB 101 22)
CSM side
System side
Analogue
telephone line
026
Note:
The CSM side modem can also be an internal PC modem
Summary of Contents for DCT1800-S
