Ericsson BS120 Page 20 User Manual Download

Page: 20 / 66

Not

r C

l Use

icsso

omm

ations

4. If you have a connection with the other cordless

phone, you can:

•

Transfer the call with

•

Continue the external call using and

Int

•

Continue the call as a three-party call using

and

Three-party calls

In a three-party call a caller is connected to two cordless
phones on the same home base station.

You have an external call and you wish to involve a
third person with a cordless phone on the same home
base station:

1. Press then

Int

to put the external call on hold.

You will hear the dial tone.

2. Dial the internal number of the destination

cordless phone.
If the cordless phone is not available or engaged
you will hear the engaged tone, and return
automatically to the external call. If the cordless
phone is free you will hear it ring.

3. Wait for a connection.

4. Press and then

to connect the three parties

in the conversation.

Summary of Contents for BS120



































































Search results

Summary of Contents for BS120

Reviews:

Related manuals for BS120

Brands by name

Popular brands

Ericsson BS120, User Manual

Search results

Summary of Contents for BS120

Reviews:

Related manuals for BS120

Brands by name

Popular brands