Ericsson BS120 Page 36 User Manual Download

Page: 36 / 66

Not

r C

l Use

icsso

omm

ations

2. Enter the PIN code for the home base station

(default is 1111).
Two dashes are displayed.

3. Enter 66.

The sequence number 0 appears on the left of the
display.

4. Press the

Down

key, once or more, to

choose a different sequence number if required.

5. Enter the exempted number.

Use the

key to delete the last digit if needed.

6. You can press the

Down

key, once or more,

to enter another exempted number.

7. Press and then press .

The numbers are now exempt from call barring.

Clearing all cordless phone
settings

You can clear all settings on the cordless phone
simultaneously. The stored numbers, the dialled numbers,
and the who called memory are also cleared.

All settings revert to the default values.

1. Press and then press for 2 seconds.

If the programming security for the cordless
phone is on four dashes are displayed. If so enter
the PIN code for the cordless phone (default is
0000).

2. Two dashes are displayed.

3. Enter 41.

4. Press and then press .

All cordless phone settings are cleared.

Summary of Contents for BS120



































































Search results

Summary of Contents for BS120

Reviews:

Related manuals for BS120

Brands by name

Popular brands

Ericsson BS120, User Manual

Search results

Summary of Contents for BS120

Reviews:

Related manuals for BS120

Brands by name

Popular brands