Extra features
51
Not
fo
r C
om
me
rc
ia
l Use
Er
icsso
n
Mo
bi
le
C
omm
un
ic
ations
AB
Setting switchboard numbers
If you want to make an external call using a switchboard
you must sometimes dial a prefix for example a zero to get
an outside line. Depending on the switchboard, you must
then wait for the dial tone before dialling the rest of the
number. You can insert an automatic pause for all external
numbers via the switchboard if it is necessary to wait for the
dial tone.
You can allocate three different switchboard
numbers, using sequential number 1, 2, or 3. If you
then call a number that starts with one of these
switchboard numbers the home base station will
automatically insert the pause. For example, if the
number of the switchboard is 12, set ‘12’ as the
switchboard number. If you then dial ‘12345’ from
the cordless phone, the home base station will
automatically insert a pause after ‘12’.
To set switchboard numbers:
1. Press and then the
R
key for 2 seconds.
Four dashes are displayed.
2. Enter the PIN code for the home base station
(default is 1111).
Two dashes are displayed.
3. Enter 63.
The sequential number 1 is displayed, together
with the first switchboard number.
A blank display means no numbers are set.
4. Enter the switchboard number.
You can delete the last digit with the
C
key.
5. Press the
Up
or
Down
key if you want to set a
switchboard number for the next sequential
number.
6. Press and then press .
The switchboard numbers are now set.
Summary of Contents for BS120
