Ericsson blip C11, User Manual

Page: 15 / 44

BLIP Manager
10
3.2.3
Windows 2000
Install Remote Access Services (RAS)
RAS is used for dial-up networking. If you don’t have Remote Access Services
(RAS) installed, install it from your Windows 2000 CD.
Install a NULL Modem
Note that you may be required to have administrator rights to install a modem!
1. Select Start — Settings — Control Panel .
2. Doubleclick on the Phone and Modem Options icon.
3. Click Add...
4. Check the Don’t detect my modem; I will select it from a list box, and click
Next .
5. Select NULL Modem Types from the Manufacturers list
6. Select RAS Serial Cable between 2 PCs from the Models list, and click
Next .
7. Select one COM port, and then click Next . If the dialogue window Digital
Signature Not Found is shown, just click Yes .
8. Click Finish, and then OK to close the Phone and Modem Options window.
Create a dial-up network connection
1. Select Start — Settings — Control Panel .
2. Doubleclick on Network and Dial-up Connections, then doubleclick on
Make new connection , and the click Next .
3. Select Dial up to private network , click Next , and then click Next again (no
phone number is needed).
4. Name the connection "BLIP", and click Finish . There will now be a dialogue
called Connect BLIP on your screen.
5. Click Properties in the Connect BLIP dialogue, and check that Modem-RAS
Serial Cable between 2 PCs is stated in the Connect using field.
6. Click Configure and set Maximum speed to 115 200.
7. Check the Enable hardware flow control box, and click OK .
8. Uncheck the Client for Microsoft Networks box.
9. Click on Internet protocol (TCP/IP), and then Properties .
Make sure that the Use default gateway on remote network
box is unchecked!
10. Click OK in the following three dialogue windows .
Start the BLIP Manager.
Select Start — BLIP Manager to start the BLIP Manager. Select settings from the
main menu, and continue with section 3.3 - Settings.