Getting Started
5
3.
Install the BLIP Manager as described in section 3.2 - Installation.
4.
Start the BLIP Manager provided on the CD. See section 3.4 - Serial
Connection for more instructions on how to configure the BLIP.
2.2
Using Ethernet Connection
To be able to use the Ethernet connection, you must set up the network
connection preferences using the BLIP Manager.
1.
Connect your BLIP using the serial interface, as shown in section 2.1 -
Using Serial Connection.
2.
Start the BLIP Manager and set up the network connection preferences as
described in section 3.5 - Configure your BLIP.
3.
Disconnect the power cable and the serial cable from the BLIP
4.
Connect the Ehternet cable between the BLIP and the network Ethernet
interface on your PC.
Summary of Contents for blip C11
Page 1: ...blip C11 User s Manual EN LZN 901 0047 P1C ...
Page 26: ...BLIP Manager 21 ...
