Ericsson blip C11, User Manual

Page: 13 / 44

BLIP Manager
8
3.2
Installation
Run the BLIP Manager setup from the CD.
3.2.1
Windows NT4
Install Remote Access Services (RAS)
RAS is used for dial-up networking. If you don’t have Remote Access Services
(RAS) installed, install it from your Windows NT CD.
Install a NULL Modem
1. Select Start — Settings — Control Panel .
2. Doubleclick on the Modem icon.
3. Click Add...
4. Check the Don’t detect my modem; I will select it from a list box, and click
Next .
5. Select NULL Modem Types from the Manufacturers list
6. Select RAS Serial Cable between 2 PCs from the Models list, and click
Next .
7. Select one COM port, click Next and then Finish .
Create a dial-up network connection
1. Select Start — Accessories — Dial-Up Networking , and click New .
2. Name the connection "BLIP".
3. Check the I know all about phonebook entries and would rather edit the
properties directly box, and click Finish .
4. Select the RAS Serial Cable between 2 PCs in the Dial Using list.
5. Uncheck the Use another port if busy box.
6. Select the Server tab, and choose PPP; Windows NT, Windows 95 Plus,
Internet as dial-up server type. Network protocols should be TCP/IP .
7. Click on TCP/IP Settings , and select the Server assigned IP address radio
button.
Make sure that the Use default gateway on remote network
box is unchecked!
8. Click OK , and then Security . Select the Accept any authentication including
clear text radio button. Click Ok, and then click Close .
Start the BLIP Manager.
Select Start — BLIP Manager to start the BLIP Manager. Select settings from the
main menu, and continue with section 3.3 - Settings.