BelAir20EO and AP 511x Series Quick Install Guide
2.2
Step 2—Mount Unit
Wall or Large Pole Mounting
Large poles have an outer diameter greater than 3 inches (7.6 cms). If mounted
on a flat surface, the unit must be mounted to a surface that is at least 1/2-inch
plywood or its equivalent. Poles must have the equivalent rigidity.
1.
Attach the mounting plate to the wall or pole.
•
For walls, use up to four 1/4 inch (M6) anchoring bolts. Use the plate as
a drill hole template. The outer edges of the plate must be elevated from
the wall surface while the center channel must touch the wall surface.
•
For large poles, use through bolts or use the pairs of slots for stainless
steel strapping. The center channel must touch the pole surface.
2.
Connect ground wire to unit.
7
1/006 92-LZA 101 803 Uen D
|
2013-12-13
