BelAir20EO and AP 511x Series Conformity and Regulatory Statements
isotropically radiated power (e.i.r.p.) is not more than that necessary for
successful communication.
This radio transmitter has been approved by Industry Canada to operate
with the antenna types listed above with the maximum permissible gain and
required antenna impedance for each antenna type indicated. Antenna types
not included in this list, having a gain greater than the maximum gain indicated
for that type, are strictly prohibited for use with this device.
Professional installation instruction
Please be advised that due to the unique function supplied by this product, the
device is intended for use with our software and licensed third-party only. The
product will be distributed through controlled distribution channel and installed
by trained professional and will not be sold directly to the general public through
retail store.
1
Installation personnel: This product is designed for specific application
and needs to be installed by a qualified personal who has RF and related
rule knowledge. The general user shall not attempt to install or change
the setting.
2
Installation location: The product shall be installed at a location where
the radiating antenna can be kept 30 cm from nearby person in normal
operation condition to meet regulatory RF exposure requirement.
3
External antenna: Use only the antennas which have been approved by the
applicant. The non-approved antenna(s) may produce unwanted spurious
or excessive RF transmitting power which may lead to the violation of
FCC/IC limit and is prohibited.
4
Installation procedure: Refer to the
BelAir20EO and AP 511x Series Quick
Install Guide
,
1/006 92-LZA 101 803
for details.
5
Warning: Please carefully select the installation location and make sure
that the final output power does not exceed the limit set force in relevant
rules. The violation of the rule could lead to serious federal penalty.
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable
aux appareils radio exempts de licence. Son fonctionnement est sujet aux
deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage
préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un
brouillage susceptible de provoquer un fonctionnement indésirable.
NOTE IMPORTANTE:
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements
IC établies pour un environnement non contrôlé. Cet équipement doit être
installé et utilisé avec un minimum de 30 cm de distance entre la source de
rayonnement et d’un corps humain.
6
1/174 02-LZA 101 803 Uen C
|
2013-12-13
