BelAir20EO and AP 511x Series Quick Install Guide
refer to the mounting procedures supplied with the antennas that were
ordered.
2.
Connect external 5 GHz or 2.4 GHz antennas to connectors. See the
figure. Connect only antennas that are approved specifically for the units.
Either antenna can connect to either connector. Use thread-locker and
self-amalgamating tape to keep connection tight and waterproof.
•
Connect external 5 GHz or 2.4 GHz antennas here.
•
Connect only antennas that are approved specifically for the units.
•
Either antenna can connect to either connector.
•
Use thread-locker and self-amalgamating tape to keep connection tight
and waterproof.
Note:
Ground wire and mounting hardware not shown.
2.4
Step 4—Prepare Power Cable (AP 5115 to AP 5118
Only)
Refer to Figure 1.
11
1/006 92-LZA 101 803 Uen D
|
2013-12-13
