BelAir20EO and AP 511x Series Conformity and Regulatory Statements
6
Declaration of Conformity for RF Exposure
This Wireless LAN radio device has been evaluated under FCC Bulletin OET
65C, Health Canada Safety Code 6 and EN 62311:2008, and found to be
compliant to the requirements set forth in CFR 47 Sections 2.1091, 2.1093, and
15.247 (b) (4) addressing RF exposure from radio frequency devices. This
Wireless LAN radio device also conforms to EU Health and Safety Directive
2004/40/EC as per EN 50385.
This device complies with FCC RF radiation exposure limits for an uncontrolled
environment. The radiated output power of this Wireless LAN device is below
the FCC radio frequency exposure limits. However, this device should still
be installed and used in such a manner that the potential for human contact
during normal operation is minimized.
Warning!
In order to comply with RF exposure limits established in the ANSI C95.1
standard, this equipment should be installed and operated at a minimum
distance of 12 inches (30 cm) between the radiator and a human body.
This transmitter must not be colocated or operating in conjunction with any
other antenna or transmitter.
The availability of some specific channels and/or operational frequency bands
are country dependent and are firmware programmed at the factory to match
the intended destination. The firmware setting is not accessible by the end user.
12
1/174 02-LZA 101 803 Uen C
|
2013-12-13
