background image

2/12

888-24-090-G-00 rev. D • 11/10

5"

(127 mm)

25˚

90˚

12˚

+12˚

<3 lbs
(1.4 kg)

20"

(508 mm)

3/11

2

1

9

8

7

16

12

13

6/10

5

4

14

15

EN

Features & Specifi cations

Height Adjustable LCD Mount attaches LCDs or tablet PC's with 75x75 or 100x100mm mounting interface

With Independent 

LCD Lift:

6-16 lbs (2.7-7.3 kg)

Without Independent LCD Lift:

20 lbs (9 kg)*

See "How To Eliminate Independent 

LCD Lift" section

<3 lbs (1.4 kg) Worksurface
<13 lbs (5.9 kg) CPU Compartment

  CAUTION: 

If the combined LCD and CPU weight is greater than 23 lbs (10.4 kg) then the CPU must 
be mounted to the rear of the cart using the Universal CPU Holder accessory (ordered 
separately).

Drawer Insert
Weight = 2 lbs (.9 kg)

<4 lbs (1.8 kg)
(without 
insert)

<2 lbs (.9 kg)
(with insert)

WARNING

IMPACT HAZARD!

MOVING PARTS CAN CRUSH AND CUT.

Minimize Lift Tension BEFORE:

· Removing Mounted Equipment.
· Shipping Cart
· Storing Cart

To Minimize Lift Tension
1.  

Lower worksurface to lowest position.

2.  

Turn adjustment nut at top of riser 

counterclockwise until it stops 
(Adjustment may require 40-60 revolutions).

Failure to heed this warning may result in 

serious personal injury or property damage!

For More information and instructions refer to product 

guide at  

http://4support.ergotron.com

 or contact 

Ergotron Customer Care at 

1-800-888-8458.

822-052

14mm (9/16”)

-20 °C
-   4 °F

  50 °C
122 °F

Relative

Humidity 

Range

5-95% rH

10 °C
50 °F

  29 °C

 86 °F

Relative

Humidity 

Range

5-95% rH

Operational

Storage

Worksurface
Secure Storage for Laptop, Thin Client or CPU up to 3.75" (95 mm) thick
Front Handle
Height Adjustment Brake
Ready On button wakes computer when set to hibernate mode
USB Hub connects keyboard and mouse USB cables
Keyboard tray slides out, tilts and allows for right or left mousing with attached mouse holder
Keyboard Light under Front Handle
Keyboard Light Switch
Cable Management and Storage for excess cables and power supplies
Storage Basket and Rear Handle
Front Locking Casters
Quick Reference Card
Auto-Lock Drawer
Auto-Lock Drawer Keypad

1.
2.
3.
4.
5.
6.
7.
8.
9.

10.
11.
12.
13.
14.
15.
16.

This Class A digital apparatus complies with Canadian 
ICES-003.
Cet appareil numérique de la classe A est conforme à la 
norme NMB-003 du Canada.

FCC Compliance Statement 

The cart has been tested and found to comply with the 
limits for a Class A digital device, pursuant to part 15 
of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference 
when the equipment is operated in a commercial 
environment. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may 
cause harmful interference to radio communications. 
Operation of this equipment in a residential area is likely 
to cause harmful interference in which case the user 
will be required to correct the interference at his own 
expense.

Changes or modifi cations not expressly approved 
by Ergotron, Inc. could void the user’s authority to 
operate the equipment.

Please contact Ergotron for complete EMC compatibility 
information.

Summary of Contents for StyleView SV31













Reviews: