Ergotron StyleView SV31, User Manual

Page: 8 / 12

8/12
888-24-090-G-00 rev. D • 11/10
c
10mm
1x
M4 x 8mm
i ii
iii
EN
Adjustment
Follow these instructions to tighten or loosen tension.
Lift – Up and down
To Stop Independent LCD Lift
For heavier Displays or when using a
Tablet PC, you can keep the LCD Lift from
moving out of position, by installing this
screw into one of the three holes on the
back of the riser depending on the desired
height.
With Independent
LCD Lift:
6-16 lbs (2.7-7.3 kg)
Without Independent LCD Lift:
20 lbs (9 kg)
WARNING
IMPACT HAZARD!
MOVING PARTS CAN CRUSH AND CUT.
DO NOT remove Stop Screw
without monitor attached.
Doing so wi ll cause monitor pivot to shoot
up rapid l y and may cause persona l injury.
To Remove Monitor:
1. Remove stop s c rew whi l e monitor is
atta c hed.
2. Lift monitor to highest postion.
3. Remove monitor.
Fai l ure to heed this warning may resu l t in
serious persona l injury or property damage!
For More information and instru c tions refer to produ c t
guide at http://4support.ergotron.com or c onta c t
Ergotron Customer Care at 1-800-888-8458.
822-055
1.
2.
3.