Operating Instruction
Spindle lifting system SLA/SLG VD
Document no.: B-00081
Edition 2019 02
Operating instruction EN
Copyright by Ergoswiss AG
1/20
Operating instruction - Spindle lifting system SLA/SLG VD
It is essential to read this operating instruction thoroughly before commissioning the system.
This operating instruction has to be stored in the immediate vicinity of the system.
Linear unit type SLA or SLG
Control box VD SCT
Manual control switch Up/Down or Memory
Errors and technical changes reserved.
Ergoswiss AG does not assume any liability for operating
errors or using the products outside of the intended
purpose use.
At the time of delivery Ergoswiss AG will replace or re-
pair defect products within accordance with the war-
ranty provisions. In addition, Ergoswiss assumes no
other liability.
For your questions and special custom demand
Ergoswiss AG will be at your disposal.
Ergoswiss AG
Nöllenstrasse 15
CH-9443 Widnau
Tel.: +41 (0) 71 727 06 70
Fax: +41 (0) 71 727 06 79
[email protected]
www.ergoswiss.com
2
1
3
