Operating instruction
Spindle lifting system SL/SK/SM 14xx Compact
Document no.: B-00061
Edition 2022 05
Operating instruction EN
Copyright by Ergoswiss AG
Page
5
of
26
2
System description
2.1
General
The basic functionality of a spindle lifting system SL/SK/SM by Ergoswiss AG is the lifting and lowering of
work surfaces, machine parts, profile systems, etc.
An operative spindle lifting System SL/SK/SM consists of a minimum of following components:
→
Lifting column SL/SK/SM
→
Control box Compact-3-eco
→
Hand switch Memory
→
Country specific power cable
The lifting column SL/SM consists of two colorless anodized aluminium profiles which are guided with plastic
guides. The inner profile is moved by an inline spindle drive. Up to 3 spindle lifting columns can be con-
nected to one control box compact-3-eco and be operated synchronously.
The intelligent control box compact-3-eco is equipped with a highly efficient switched-mode power supply
(SMPS) and a monitoring software (overload, duty cycle, overheat). Due to the optimised driving comfort,
the end positions are gently approached as low-speed zones up to the standstill. Additional functions, such
as the synchronisation of two to four control boxes or the connection of safety strips (squeezing protection)
can be used.
With the hand switch Memory the lifting system can be operated comfortably, the work surface will be ad-
justed steplessly in its height.
The current height of the work surface is shown continuously on the display (in cm or inches). In addition,
up to four different memory positions can be saved and approached individually.
2.2
Intended purpose use
Scope of application
NOT scope of application
→
Height adjustment of worktops
→
Height adjustment of machine parts
→
Height adjustment of profile systems
→
… the list is not exhaustive
→
Clamping tool
→
Press (or counterhold for press)
→
Passenger transport
→
Security component
→
… the list is not exhaustive
2.2.1
General safety instructions
ATTENTION
The safety instructions must be paid attention to! If the system is operated improperly or not
in accordance with the intended use, there may be a risk to persons and property!
The lifting system may be used if:
→
it is located in closed rooms, in a dry and non-explosive environment.
→
the ambient temperature is b10 °C and +40 °C.
→
the relative humidity range is between 30% and 70% (non-condensing).
→
there are no strong electromagnetic fields nearby.
→
This device can be used by children aged 8 and over and by persons with reduced physical, sensory or
mental abilities or lack of experience and knowledge if they are supervised or have been instructed in
the safe use of the device and the resulting dangers to understand.
