Sana comfort 150 and 250 REHA
Article no.: 2.520064 rev.: b
Page 9 of 24
4
Unit components
4.1
Control panel
The control panel is mounted on the upper side of the control panel carrier with two plug-in tabs. During
normal operation, the display should be facing the examiner. It is possible to turn the console 180 de-
grees for special applications such as patient training, etc., so that the patient can reach the control ele-
ments and see the display.
All of the control electronics for ergometer operation and blood pressure measurement are located in the
control panel.
A backlit LCD featuring the complete range of information is located on the front side under a foil key-
board with a see-through window. The control elements for the adjustment and operation of the ergome-
ter are located on the foil keyboard.
The connections for the blood pressure cuff are located on the underside of the Sana comfort 250. In
couch ergometers, they contain an extension line. The cuff socket is located on the couch's upper edge.
An LCD on which the patient can see the number of pedal rotations per minute is located on the panel's
upper side.
4.2
Rotational speed display on the control panel
n = crank rotations per min
U min
–1
4.2.1
Panel interfaces for 250
The extension line for the blood pressure cuff is connected at the bottom of the control panel.
1.
Cuff connection
2.
Microphone connection
1
2