manualshive.com logo in svg

ergoline ers2, System Manual

Share
Download
ergoline ers2 System Manual Download Page 41

6 Cleaning and Disinfection Instructions

ers2 – 1-Channel ECG Telemetry System

39

201000401000 / Rev 04

6

Cleaning and Disinfection Instructions

Clean and disinfect the devices before their first use, before applying them to a patient, and after 
removing them from a patient.

Clean and disinfect the devices when sending them to ergoline or a certified ergoline service partner.

Observe the following information for cleaning and disinfection.

6.1 1-Channel Transmitter

6.1.1

Cleaning

Recommended cleaning agent:

 Isopropyl alcohol, 70 % solution (IPA)

• Prepare the cleaning solution according to the manufacturer's instructions.
• Dampen a clean cloth with the selected cleaning solution.
• Wring excess liquid from the cloth and squeeze until dry.
• Wipe the exterior surfaces of the 1-channel transmitter until all visible soil has been removed.

CAUTION

Risk of infection

After use, the ECG system may be contaminated with bacteria or viruses.
Clean and disinfect the 1-channel transmitter and the applied parts according to the cleaning and 
disinfection instructions in this manual.

NOTICE

Cleaning and disinfection

Wrong cleaning agents or disinfectants or wrong application of these substances may damage the 
ECG system.
Use the recommended cleaning agents and disinfectants for cleaning and disinfection.
Clean and disinfect your ECG system according to the instructions in this manual.

NOTICE

Inappropriate cleaning and disinfection

When the battery compartment of the 1-channel transmitter is not properly closed, humidity 
entering the compartment during cleaning and disinfection may damage the device.
Close the battery compartment of the 1-channel transmitter before cleaning and disinfection 
according to the instructions in this manual.

NOTICE

The protection rating applies only if the following conditions are met

IP42 applies only when the battery cover of the 1-channel transmitter is closed. Before starting 
a recording and before cleaning and disinfecting the device, make sure that the battery compart-
ment is properly closed.

Summary of Contents for ers2





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands