manualshive.com logo in svg

ergoline ers2, System Manual

Share
Download
ergoline ers2 System Manual Download Page 31

4 Start-up and Preparation

ers2 – 1-Channel ECG Telemetry System

29

201000401000 / Rev 04

4.2 1-Channel Transmitter

During commissioning, an ergoline service partner needs to configure the 1-channel transmitter in 
the application software.

• Clean and disinfect the 1-channel transmitter according to the instructions in this manual.
• Insert the AAA battery into the 1-channel transmitter according to the instructions in this 

manual.

• Switch on the 1-channel transmitter according to the instructions in this manual for the nor-

mal operation mode.

• After switch-on, check the LED status on the 1-channel transmitter to verify the operating status.
• Switch off the 1-channel transmitter according to the instructions in this manual for the normal 

operation mode.

After starting the PC system and the application software, the activated 1-channel transmitter 
is ready for operation. The connection to a 1-channel transmitter that has been switched on and 
configured appropriately occurs automatically via the application software.

Shutting down the PC system and switching off the 1-channel transmitter deactivates the trans-
mitter.

Summary of Contents for ers2





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands