Ergo Hardcase Pro User Manual Download

Page: 61 / 88

Chapter 5

— Using the BIOS Setup Utility

Performance The computer always uses optimal CPU clock

speed, and does not utilize Intel®
SpeedStep™ Technology

Battery

The computer always utilize Intel®
SpeedStep™ Technology. This technology
lowers the CPU clock speed to save power.

Geyserville
Optimized
Speed

Auto

Only when the battery is in use, the computer
will utilize Intel® SpeedStep™ Technology.
When the computer is running on AC power,
it will run in Performance mode.

Panel off

The LCD will turn off when the cover is
closed.

Cover Close

Suspend

The LCD will turn off and the computer will
enter suspend mode when the cover is
closed.

Enabled

When AC adapter is not in use, the monitor is
run in power-saving mode.

Auto DIM

Disabled The

monitor

does

not go into power-saving

mode.

Disabled

Batttery calibration is disabled.

Battery Auto
Calibration

Enabled Battery

calibration is endabled. Battery

calibration will optimize the battery
performance.

Disabled

FAN learning is disabled.

FAN Auto
Learning

Enabled

FAN learning is ensabled. FAN learning will
optimize the fan speed.

All Device

USB Device
Legacy
Support

Disabled

Dos supported USB keyboard, CD-ROM and
floppy disk drive. The default is

All Device.

Clear
NVRAM

Yes

Determines whether CMOS will be cleared
after Flash BIOS. The default value is

Yes

。

Enabled

OnBoard FIR
Port

Disabled

Infrared support. The default value is

Disabled

Summary of Contents for Hardcase Pro

























































































Search results

Summary of Contents for Hardcase Pro

Reviews:

Related manuals for Hardcase Pro

Brands by name

Popular brands

Ergo Hardcase Pro, User Manual

Search results

Summary of Contents for Hardcase Pro

Reviews:

Related manuals for Hardcase Pro

Brands by name

Popular brands