Ergo Hardcase Pro, User Manual

Page: 59 / 88

Chapter 5 — Using the BIOS Setup Utility
54
Disabled
HDD
CDROM
1st Boot Device
2nd Boot Device
3rd Boot Device
USB FDD
1st Boot Device default is HDD.
2nd Boot Device default is CDROM.
3rd Boot Device default is USB FDD.
Warning: If 1st Boot Device
is set as external device and
the rest are Disabled, do not
remove the device when
turning on the computer or
start up will be disrupted.
If this occurs, please reset
the value in this field.
Read-Write Can read and write Floppy Access
Control
Read Only Can read only
Read-Write Can read and write Hard Disk Access
Control
Read Only Can read only
Disabled S.M.A.R.T. for Hard
Disks
Enabled
Only S.M.A.R.T. Hard Disks are
supported. The default is
Enabled .
Off Bootup Num-Lock
On
Use this field to initially disable the
NumLock feature of the internal
keyboard when the notebook starts.
The default is
Off.
Enabled TouchPad Support
Disabled
The default value is Enabled .
Please choose Disabled if you do
not wish to operate the TouchPad.
Setup The default value is Setup , which
specifies that a password is only
required to enter the setup utility.
Password Check
Always If Always is selected, the password is
required when the system is booted up
or resuming from a suspend-to-disk.
None
8MB
16MB
Share Memory Size
32MB
This field displays the amount of
memory detected by the system during
bootup. It allows you to select shared
memory size for VGA usage. They are
display only fields.