EG_GenLoc31e_988_CL_002_UK
Page 16 / 22
Descriptions and non-contractual illustrations in this document are given as an indication only.
ERCO&GENER reserves the right to make any modifications.
<n>
0
Turns off display of UBX frames
1
Display RX frames only
2
(Display TX frames only
3
Display RX and TX frames
n+80 Display with ascii interpretation
Examples :
Command
Possible Responses
AT+UBXSHOW
AT+UBXSHOW=(0-3) + (80 for ASCII)
OK
Display syntax
AT+ UBXSHOW=1
OK
Enable display of RX frames
only
AT+ UBXSHOW=2
OK
Enable display of TX frames
only
AT+ UBXSHOW=3
OK
Enable display of both RX
and TX frames
AT+ UBXSHOW=83
OK
Enable display of both RX
and TX frames and ascii
interpretation
AT+ UBXSHOW?
+UBXSHOW=83
OK
Display current setting for
UBXSHOW. In this case RX,
TX frames and ascii
interpretation
AT+ UBXSHOW=0
OK
Turns off display of UBX
frames
Example a) - Display of RX frames only :
AT+UBXSHOW=1
OK
AT+UBXCFGDAT?
- <UBX RX> CFG_DAT:
B5 62 06 06 34 00 00 00 57 47 53 38 34 00 00 00
00 40 A6 54 58 41 88 6D 74 96 1D A4 72 40 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 E2 A5
Current Datum: 0 - WGS84
OK
- <UBX RX> ACK_ACK:
B5 62 05 01 02 00 06 06 14 3D
Example b) - Display of RX and TX frames with ascii interpretation :
AT+UBXSHOW=83
OK
AT+UBXCFGDAT?
