Erbauer ERN634ATL Handbook Download Page 2

Page: 2 / 16

1/2" AIR RATCHET WRENCH

GUARANTEE

This

product carries a 2 year guarantee. If your product develops a fault within this

period, you should in the first instance contact the retailer where the item was purchased.

This guarantee specifically excludes losses caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental damage

- Cosmetic damage

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

Congratulations on your purchase of a quality power tool from Erbauer (UK) Ltd. This

product should give you reliable service but for your peace of mind this

power tool does carry a 2 year guarantee, the terms of which are detailed below.

If this product develops a fault within the guarantee period contact your retailer.

Please retain this handbook in case you need to refer to safety, care or guarantee

information in the future.

Consumables supplied with this product are excluded from any guarantee offered.

This guarantee does not affect your statutory rights. This guarantee is only valid in the UK.

Summary of Contents for ERN634ATL
















