Erbauer ERB617SDR, Manual

Page: 19 / 24

240W 1/3 SHEET SANDER ERB617SDR
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working
controls free of dust. Occasionally you may see
sparks through the ventilation slots. This is normal
and will not damage your power tool.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
TROUBLESHOOTING
1. If your sander will not operate, check the power
at the mains plug.
2. If the sander does not abrade surface, checking
the sanding paper. If the sanding paper has been
worn, replace the new paper and try again. The
paper must be kept in a dry place, if it is allowed to
become damp, the abrasive particles will lose their
adhesion to the backing paper and will not abrade.
3. If the sander dose not move smoothly, The
sanding paper may be loose, damaged or wrinkled.
Replace and try again.
4. If a fault can not be rectified return the sander to
an authorized dealer for repair.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check
with your local authorities or retailer for recycling
advice.